LivePlus for iOS or Android

You can use the buttons at the top of the screen to start the current operation and control the camera. At the bottom of the screen, you can set the mode of operation, adjust the settings for the current operation, or open the Clip Manager to monitor any videos that you send to the server. The bottom of the screen also shows the name of the server output assigned in Control.

On Android devices, you can also change the application’s settings directly from the Preview screen.

Configure the app on your iOS device

1. In the iOS device Settings application, tap LivePlus.
2. In the Allow Mobile to Access section, configure the permissions that you want the app to have.
3. In the Video section, perform the following actions:
   1. Set the Standard field to NTSC or PAL.
   2. Set the Resolution field.
4. If necessary, to configure how an audio device is connected, in the External Audio Device section, change the Connected by field.
5. In the Live Streaming section, perform one or more of the following actions:
   • Set the Max Bitrate field. For example, for an HD quality video stream, set the bitrate to 5 Mb/s.
   • If your station sets the server latency in Dejero Control, enable the Preset Latency field.
   • If you want to adapt the latency based on network conditions, enable the Use Up-to Latency field. For example, when the Up to value is set to 3 seconds, the stream latency varies between 800ms (the minimum latency) and 3 seconds, depending on the network conditions.
   • If you do not want to view preview screen shots in Control, in the Control Integration section, turn off the Enable for Live Grid field.
6. In the Cellular Network section, verify that the Use Cellular Radio field is enabled. For enhanced reliability and picture quality, connect both cellular and Wi-Fi connections.
7. If using a BGAN satellite to transmit, in the Satellite Transmission via Wi-Fi section, turn on the Satellite/BGAN Mode field.

Configure the app on your Android device

1. In the app on your Android device, tap Settings.
2. In the Video section, perform the following actions:
   1. Set the Frame Rate field.
   2. Set the Resolution field.
3. In the Live Streaming section, perform one or more of the following actions:
   • Set the Max Bitrate field. For example, for an HD quality video stream, set the bitrate to 5 Mb/s.
   • In the IFB Output field, turn IFB on or off.
   • Set the Latency Mode field.
   • Set the Latency Value field.
4. In the Dejero Control Integration section, select the Enable for Live Grid option to view preview screen shots in Control.
5. In the Cellular Network section, verify that the Use Cellular Radio field is enabled.
6. In the External Audio Devices section, select the Use Bluetooth option to use a paired Bluetooth headset as the audio device. The MIC INPUT is used for the connection.

Note: Using IFB and Bluetooth inputs at the same time is not supported.