Skip to content
Required SIM card upgrade

GateWay M6E6

How to replace the SIM cards on your Dejero GateWay M6E6

  1. Power down your GateWay.
  2. Remove the five screws holding down the top lid. There are two screws on either side and one screw located on the top.
    GateWay unit
  3. With the lid removed, locate the SIM cards on the left side of the GateWay. They are in a DIMM module, oriented vertically.
    GateWay unit opened
    GateWay unit SIM slots
  4. Swap the existing SIMs with the new ones we sent you. Ensure that each SIM is inserted into the proper SIM slot:
    SIM 1 – AT&T
    SIM 2 – Verizon
    SIM 3 – T-Mobile
    SIM 4 – T-Mobile
    SIM 5 – Verizon
    SIM 6 – AT&T
    A SIM that is not inserted properly will look like SIM 3, shown here:
    GateWay unit SIM slots filled
  5. Place the lid back on the GateWay and replace the five screws.
  6. Power up the GateWay and ensure that all six SIMs are appearing on the OLED display.
  7. Contact Dejero Support to activate the new SIMs at: 1 866 808 3665 x2 or support@dejero.com.