Environment:

• WayPoint 3 Core software version 6.6.1.8 or later

Description:

Software version 6.6.1.8 supports CrowdStrike on Waypoint 3.

Steps for preparing a USB drive

1. Login to the CrowdStrike portal 
2. Click the main menu icon in the upper-left corner
   
3. Select Host setup and management from the menu
4. Under the Deploy category, click on Sensor downloads
5. Click the Linux tab, Go to Debian, and Click Download “Debian – 9/10/11/12 – 7.19.17219” (Latest version)
6. Copy the customer ID from the right side “How to install” category to the file cid.txt
7. Copy falcon-sensor .deb package (e.g. falcon-sensor_7.19.0-17219_amd64.deb) and cid.txt to a USB (Note: the falcon-sensor file name must start with falcon-sensor_ and end with .deb. DO NOT RENAME the downloaded falcon sensor file name.)
   
   (Note: USB MUST be formatted in FAT32 or exFAT file system. NTFS is NOT supported)

Steps for Installing CrowdStrike on Waypoint 3

1. Connect an external monitor to the WP3
2. Plug in the USB containing the falcon-sensor package and cid.txt file to the WP3
   (Note: USB should be FAT32 or exFAT file system, NTFS is NOT supported)
3. Go to the CrowdStrike menu from OOBE-UI, and choose Install.
   
   
4. The CrowdStrike script will automatically detect the falcon-sensor .deb package and cid.txt file.
   
5. Click Install
6. The script will display “Installing CrowdStrike, please wait…”
7. The following message will be displayed upon successful installation of CrowdStrike
   

Steps to Confirm CrowdStrike Installation

1. Go to OOBE-UI, Go to the CrowdStrike menu
2. Click Check Installation Status, If you see the following message, CrowdStrike is installed successfully
3. Confirm from the CrowdStrike portal
   • Click the main menu icon in the upper-left corner
   • Select Host Setup and Management from the menu
   • Select Host dashboard
   • Click Online Hosts
   • Confirm the falcon-sensor version and that igw-$DeviceSerialNumber, e.g. igw-450006, is online